Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 256 of 259
3.5.7.9 SAP AT Commands Set
3.5.7.9.1 Remote SIM Enable - #RSEN
#RSEN – Remote SIM Enable
AT#RSEN=<mode>[,
<sapformat>[,
<role>[,
<muxch>[,
<beacon>]]]]
Set command is used to enable/disable the Remote SIM feature.
Parameters:
<mode>
0 - disable
1 - enable
<sapformat>
0 - X-SAP
1 - binary SAP (default)
<role>
0 - remote SIM Client (default)
1 - remote SIM Server (unsupported)
<muxch> - MUX Channel Number; mandatory if <mode>=1
and <sapformat>=1
1..3 - dummy value
<beacon> - retransmition timer of SAP Connection Request
0 - only one transmition (default)
1..100 - timer interval in seconds.
NOTES:
If the module has a SIM inserted, when it receives the enable
Command:
- de-register from the actual network
- de-initialize the current SIM.
NOTE for <sapformat>=1 (binary SAP): while RSEN is activate SAP
connection status is signalled with following URC:
#RSEN: <conn>
where
<conn> - connection status
0 - disconnected
1 - connected
AT#RSEN? Read command returns the connection status of Remote SIM feature
AT#RSEN=? Test command returns all supported values of Remote SIM Enable
command