Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 249 of 259
#STGI - SIM Tookit Get Information
37 - SET UP MENU
Requested command parameters are sent using an #STGI indication:
#STGI: <parameters>
where <parameters> depends upon the ongoing proactive command as
follows:
if <cmdType>=1 (REFRESH)
#STGI: <cmdType>,<refresh type>
where:
<refresh type>
0 - SIM Initialization and Full File Change Notification;
1 - File Change Notification;
2 - SIM Initialization and File Change Notification;
3 - SIM Initialization;
4 - SIM Reset
if <cmdType>=16 (SET UP CALL)
#STGI: <cmdType>,<cmdDetails>,[<confirmationText>],
<calledNumber>
where:
<cmdDetails> - unsigned integer, used as an enumeration
0 - Set up call, but only if not currently busy on another call
1 - Set up call, but only if not currently busy on another call, with redial
2 - Set up call, putting all other calls (if any) on hold
3 - Set up call, putting all other calls (if any) on hold, with redial
4 - Set up call, disconnecting all other calls (if any)
5 - Set up call, disconnecting all other calls (if any), with redial
<confirmationText> - string for user confirmation stage
<calledNumber> - string containing called number
if <cmdType>=17 (SEND SS)
if <cmdType>=18 (SEND USSD)
if <cmdType>=19 (SEND SHORT MESSAGE)
if <cmdType>=20 (SEND DTMF)
if <cmdType>=32 (PLAY TONE)
#STGI: <cmdType>[,<text>]
where: