Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 237 of 259
#CSURVF - Network Survey Format
<format> - numbers format
0 - Decimal
1 - Hexadecimal values, no text
2 - Hexadecimal values with text
AT#CSURVF? Read command reports the current number format, as follows:
#CSURVF: <format>
AT#CSURVF=? Test command reports the supported range of values for the parameter
<format>.
3.5.7.6.8 <CR><LF> Removing On Easy Scan® Commands Family -
#CSURVNLF
#CSURVNLF - <CR><LF> Removing On Easy Scan® Commands Family
AT#CSURVNLF=
[<value>]
Set command enables/disables the automatic <CR><LF> removing from
each information text line.
Parameter:
<value>
0 - disables <CR><LF> removing; they’ll be present in the information text
(factory default)
1 - remove <CR><LF> from imformation text
AT#CSURVNLF? Read command reports whether automatic <CR><LF> removing is currently
enabled or not, in the format:
<value>
AT#CSURVNLF=? Test command reports the range of values for parameter <value>.
3.5.7.6.9 Extended Network Survey - #CSURVEXT
#CSURVEXT - Extended Network Survey
AT#CSURVEXT
[=<value>]
Set command enables/disables extended network survey.
Parameter:
<value>
0 - disables extended network survey (factory default)
1 - enables extended network survey; all the network survey execution
commands (#CSURV, #CSURVC, #CSURVU, #CSURVUC,
#CSURVB, #CSURVBC) display the BAList for every valid scanned
BCCh carrier
2 - enables extended network survey; all the network survey execution
commands (#CSURV, #CSURVC, #CSURVU, #CSURVUC,