Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 229 of 259
#CSURV - Network Survey
<lac> - location area code; if #CSURVF last setting is 0, <lac> is a decimal
number, else it is a 4-digits hexadecimal number
<cellId> - cell identifier; if #CSURVF last setting is 0, <cellId> is a decimal
number, else it is a 4-digits hexadecimal number
<cellStatus> - string type; it is the cell status
..CELL_SUITABLE - C0 is a suitable cell.
CELL_LOW_PRIORITY - the cell is low priority based on the received
system information.
CELL_FORBIDDEN - the cell is forbidden.
CELL_BARRED - the cell is barred based on the received system
information.
CELL_LOW_LEVEL - the cell <rxLev> is low.
CELL_OTHER - none of the above e.g. exclusion timer running, no
BCCH available…etc.
<numArfcn> - number of valid channels in the Cell Channel Description
<arfcnn> - arfcn of a valid channel in the Cell Channel Description (n is in
the range 1..<numArfcn>)
<numArfcn> - decimal number; it is the number of valid channels in the
Cell Channel Description
<arfcnn> - decimal number; it is the arfcn of a valid channel in the Cell
Channel Description (n is in the range 1..<numArfcn>)
<numChannels> - decimal number; it is the number of valid channels in
the BCCH Allocation list; the output of this information for non-
serving cells depends on last #CSURVEXT setting:
1. if #CSURVEXT=0 this information is displayed only for
serving cell
2. if #CSURVEXT=1 or 2 this information is displayed also for
every valid scanned BCCH carrier.
<ban> - decimal number; it is the arfcn of a valid channel in the BA list (n
is in the range 1..<numChannels>); the output of this
information for non-serving cells depends on last #CSURVEXT
setting:
1. if #CSURVEXT=0 this information is displayed only for
serving cell
2. if #CSURVEXT=1 or 2 this information is displayed also for
every valid scanned BCCH carrier.
(The following informations will be printed only if GPRS is supported in the
cell)
<pbcch> - packet broadcast control channel
0 - pbcch not activated on the cell
1 - pbcch activated on the cell
<nom> - network operation mode
1
2
3
<rac> - routing area code
0..255 -