Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 227 of 259
3.5.7.5.9 E-mail Parameters Reset - #ERST
#ERST - E-mail Parameters Reset
AT#ERST Execution command resets the actual e-mail parameters in the NVM of the
device to the default ones.
The values reset are:
- E-mail User Name
- E-mail Password
- E-mail Sender Address
- E-mail SMTP server
AT#ERST=? Test command returns the OK result code.
3.5.7.5.10 SMTP Read Message - #EMAILMSG
#EMAILMSG - SMTP Read Message
AT#EMAILMSG Execution command returns the last response from SMTP server.
AT#EMAILMSG=? Test command returns the OK result code.