Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 21 of 259
+CCWA, +CUSD, +CAOC,
+CSSN, +CIND, +CMER,
+CPBS, +CMEE, +CGREG,
+CMGF, +CSCA, +CSDH,
+CNMI, #QSS, #ACAL,
#ACALEXT, #ECAM, #SMOV,
#MWI, #NITZ, #SKIPESC,
#STIA, #E2ESC
+CALM, +CRSL, +CMUT,
+CLVL, +VTD, +CSCB,
#CAP, #SRS, #SRP,
#STM, #DVI, #E2SMSRI,
#CODEC, #SHFEC, #HFMICG
3
,
#HSMICG, #SHFSD, #SPKMUT,
#E2SLRI, #DAC
The values set by following commands are automatically stored in NVM, without issuing any storing
command and independently from the profile (unique values), and are automatically restored at
startup:
#SELINT, +COPS
3
, +CGCLASS,
+CGDCONT, +CGQMIN, +CGQREQ,
+CGEQMIN, +CGEQREQ, +WS46,
#DIALMODE, #BND, #AUTOBND,
#SCFG
The values set by following commands are stored in NVM on demand, issuing specific commands
and independently from the profile:
+CSCA, +CSMP, +CSCB
stored by +CSAS
4
command and restored by +CRES
4
command.
#SLED
stored by #SLEDSAV command.
#VAUX
stored by #VAUXSAV command.
#USERID, #PASSW, #PKTSZ,
#DSTO, #SKTTO, #SKTSET
#SKTCT
stored by #SKTSAV command and automatically restored at startup; factory default valutes are restored by #SKTRST
command.
#ESMTP, #EADDR, #EUSER,
#EPASSW
stored by #ESAV command and automatically restored at startup; factory default valutes are restored by #ERST
command.
$GPSP
stored by $GPSSAV command and automatically restored at startup; factory default valutes are restored by $GPSRST
command.
3
It is partially stored in NVM; see command description.
4
Both commands +CSAS and +CRES deal with non-volatile memory, intending for it either the NVM and the
SIM storage.