Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 192 of 259
#SHSSD - Set Handset Sidetone
#SHSSD: <mode>
AT#SHSSD=? Test command returns the supported range of values of parameter
<mode>.
3.5.7.1.62 Repeat Last Command - #/
#/ - Repeat Last Command
AT#/ Execute command is used to execute again the last received command.
3.5.7.1.63 Network Timezone - #NITZ
#NITZ - Network Timezone
AT#NITZ=
[<val>
[,<mode>]]
Set command enables/disables automatic date/time updating, Full (or Short)
Network Name applying and Network Timezone unsolicited indication.
Date and time information and Full (or Short) Network Name information
may be sent by the network after GSM/WCDMA registration or after GPRS
attach.
Parameters:
<val>
0 - disables automatic set (factory default)
1..3 – value obtained as sum of the following values:
1 - enables automatic date/time updating
2 - enables Full (or Short) Network Name applying
<mode>
0 - disables unsolicited message (factory default)
1 - enables unsolicited message; after date and time updating the following
unsolicited indication is sent:
#NITZ: “yy/MM/dd,hh:mm:ss”
where:
yy - year
MM - month (in digits)
dd - day
hh - hour
mm - minute
ss - second
AT#NITZ? Read command reports whether automatic date/time updating and Full (or
Short) Network Name applying are is currently enabled or not, and whether
Network Timezone unsolicited indication is enabled or not, in the format:
#NITZ: <val>,<mode>