Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 183 of 259
#MWI - Message Waiting Indication
3 - Fax
4 - E-mail
5 - Other
<count> - message counter: network information reporting the number of
pending messages related to the message waiting indicator
<indicator>.
The presentation at startup of the message waiting indicators status, as
they are currently stored on SIM, is as follows:
#MWI: <status>[,<indicator>[,<count>][<CR><LF>
#MWI: <status>,<indicator>[,<count>][...]]]
where:
<status>
0 - no waiting message indicator is currently set: if this the case no other
information is reported
1 - there are waiting messages related to the message waiting indicator
<indicator>.
<indicator>
1 - either Line 1 (CPHS context) or Voice (3GPP context)
2 - Line 2 (CPHS context)
3 - Fax
4 - E-mail
5 - Other
<count> - message counter: number of pending messages related to the
message waiting indicator <indicator> as it is stored on SIM.
AT#MWI? Read command reports wheter the presentation of the message waiting
indicator URC is currently enabled or not, and the current status of the
message waiting indicators as they are currently stored on SIM. The
format is:
#MWI: <enable>,<status>[,<indicator>[,<count>][<CR><LF>
#MWI: <enable>,<status>,<indicator>[,<count>][...]]]
AT#MWI=? Test command returns the range of available values for parameter <enable>
.
3.5.7.1.44 Audio Codec - #CODEC
#CODEC - Audio Codec