Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 182 of 259
#MBN - Mailbox Numbers
#MBN: <index>,<number>,<type>[,<text>][,mboxtype][…]]]
where:
<index> - record number
<number> - string type mailbox number in the format <type>
<type> - type of mailbox number octet in integer format
129 - national numbering scheme
145 - international numbering scheme (contains the character "+")
<text> - the alphanumeric text associated to the number; used character set
should be the one selected with command +CSCS
<mboxtype> - the message waiting group type of the mailbox, if available:
"VOICE" - voice
"FAX" - fax
"EMAIL" - electronic mail
"OTHER" - other
Note: if all queried locations are empty (but available), no information text
lines will be returned.
AT#MBN=? Test command returns the OK result code.
3.5.7.1.43 Message Waiting Indication - #MWI
#MWI - Message Waiting Indication
AT#MWI=<enable> Set command enables/disables the presentation of the message waiting
indicator URC.
Parameter:
<enable>
0 - disable the presentation of the #MWI URC
1 - enable the presentation of the #MWI URC each time a new message
waiting indicator is received from the network and, at startup, the
presentation of the status of the message waiting indicators, as they
are currently stored on SIM..
The URC format is:
#MWI: <status>,<indicator>[,<count>]
where:
<status>
0 - clear: it has been deleted one of the messages related to the indicator
<indicator>.
1 - set: there’s a new waiting message related to the indicator <indicator>
<indicator>
1 - either Line 1 (CPHS context) or Voice (3GPP context)
2 - Line 2 (CPHS context only)