Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 181 of 259
#ECAM - Extended Call Monitoring
1 - voice
2 - data
<number> - called number (valid only for <ccstatus>=1)
<type> - type of <number>
129 - national number
145 - international number
Note: the unsolicited indication is sent along with usual codes (OK, NO
CARRIER, BUSY...).
AT#ECAM? Read command reports whether the extended call monitoring function is
currently enabled or not, in the format:
#ECAM: <onoff>
AT#ECAM=? Test command returns the list of supported values for <onoff>
3.5.7.1.41 SMS Overflow - #SMOV
#SMOV - SMS Overflow
AT#SMOV=
[<mode>]
Set command enables/disables the SMS overflow signalling function.
Parameter:
<mode>
0 - disables SMS overflow signaling function (factory default)
1 - enables SMS overflow signalling function; when the maximum storage
capacity has reached, the following network initiated notification is send:
#SMOV: <memo>
AT#SMOV? Read command reports whether the SMS overflow signalling function is
currently enabled or not, in the format:
#SMOV: <mode>
AT#SMOV=? Test command returns the supported range of values of parameter <mode>.
Example AT#SMOV?
#SMOV: 0
OK
3.5.7.1.42 Mailbox Numbers - #
#MBN - Mailbox Numbers
AT#MBN Execution command returns the mailbox numbers stored on SIM, if this
service is provided by the SIM.
The response format is:
[#MBN: <index>,<number>,<type>[,<text>][,mboxtype][<CR><LF>