Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 177 of 259
#SERVINFO - Serving Cell Information
“II”
..”III”
<RAC> - Routing Area Color Code
<PAT> - Priority Access Threshold
..0
..3..6
<UARFCN> - UMTS ARFCN of the serving cell
<PSC> - Primary Synchronisation Code
<DRX> - Discontinuous reception cycle length
<SD> - Service Domain
0 – No Service
1 – CS Only
2 – PS Only
3 – CS & PS
<RSCP> - Received Signal Code Power in dBm
3.5.7.1.36 Query SIM Status - #QSS
#QSS - Query SIM Status
AT#QSS=
[<mode>]
Set command enables/disables the Query SIM Status unsolicited indication
in the ME.
Parameter:
<mode> - type of notification
0 - disabled (factory default); it’s possible only to query the current SIM
status through Read command AT#QSS?
1 - enabled; the ME informs at every SIM status change through the
following unsolicited indication:
#QSS: <status>
where:
<status> - current SIM status
0 - SIM NOT INSERTED
1 - SIM INSERTED
2 - enabled; the ME informs at every SIM status change through the
following unsolicited indication:
#QSS: <status>
where:
<status> - current SIM status
0 - SIM NOT INSERTED
1 - SIM INSERTED
2 - SIM INSERTED and PIN UNLOCKED