Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 176 of 259
#MONI - Cell Monitor
informations, along with the ordinal number of the current selected cell, in
the format:
#MONI: (<MaxCellNo>,<CellSet>)
where:
<MaxCellNo> - maximum number of cells, in a neighbour of the serving cell
and excluding it, from which we can extract GSM-related
informations. This value is always 6.
<CellSet> - the last setting done with command #MONI.
Note The refresh time of the measures is preset to 3 sec.
The timing advance value is meaningful only during calls or GPRS transfers
active.
3.5.7.1.35 Serving Cell Information - #SERVINFO
#SERVINFO - Serving Cell Information
AT#SERVINFO Execution command reports informations about serving cell, in the format:
(GSM network)
#SERVINFO: <B-ARFCN>,<dBM>,<NetNameAsc>,<NetCode>,
,<BSIC>,<LAC>,<TA>,<GPRS>[,[<PB-ARFCN>],[<NOM>],
<RAC>,[PAT]]
(WCDMA network)
#SERVINFO: <UARFCN>, <dBM>,
<NetNameAsc>,<NetCode>,<PSC>,<LAC>,<DRX>,<SD>,<RSCP>,
<NOM>,<RAC>
where:
<B-ARFCN> - BCCH ARFCN of the serving cell
<dBM> - received signal strength in dBm
<NetNameAsc> - operator name, quoted string type
<NetCode> - country code and operator code, hexadecimal
representation
<BSIC> - Base Station Identification Code
<LAC> - Localization Area Code
<TA> - Time Advance: it’s available only if a GSM or GPRS is running
<GPRS> - GPRS supported in the cell
0 - not supported
1 - supported
The following informations will be present only if GPRS is supported in the
cell
<PB-ARFCN> - PBCCH ARFCN of the serving cell; it’ll be printed only if
PBCCH is supported by the cell, otherwise the label “hopping” will
be printed
<NOM> - Network Operation Mode
..”I”