Specifications

UC864-E/G AT Commands Reference Guide

80304ST10041a Rev. 3 - 18/07/08

#MSCLASS - Multislot Class Control

<class> - multislot class

1..12 - GPRS class (12 factory default)

0 - the new multislot class is enabled only at the next detach/attach or

after a reboot.

1 - the new multislot class is enabled immediately, automatically forcing a

detach / attach procedure.

AT#MSCLASS? Read command reports the current value of the multislot class in the

format:

#MSCLASS: <class>

AT#MSCLASS=? Test command reports the range of available values for both parameters

<class> and <autoattach>.

3.5.7.1.34 Cell Monitor - #MONI

#MONI - Cell Monitor

AT#MONI[=

[<number>]]

Set command sets one cell out of seven, in a neighbour of the serving cell

including it, from which extract GSM/WCDMA-related informations.

Parameter:

0..6 - it is the ordinal number of the cell, in a neighbour of the serving cell

(default 0, serving cell).

7 - it is a special request to obtain GSM-related informations from the

whole set of seven cells in the neighbour of the serving cell.

0 – it is the active set

1 – it is the candidate set

2 – it is the syncronized neighbour set

3 – it is the asyncronized neighbour set

4..7 – it is not available

Note: issuing AT#MONI<CR> reports the following GSM/WCDMA-related

informations for selected cell and dedicated channel (if exists).

a) When extracting data for the serving cell and the network name is

known the format is:

(GSM network)

#MONI: <netname> BSIC:<bsic> RxQual:<qual> LAC:<lac> Id:<id>

ARFCN:<arfcn> PWR:<dBm> dBm TA: <timadv>