Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 151 of 259
+FTM - Transmit Data
97 - V17/9600 bps Training Long
98 - V17/9600 bps Training Short
AT+FTM=? Test command returns all supported values of the parameter <mod>.
Note: test command result is without command echo
Reference ITU T.31 and TIA/EIA-578-A specifications
3.5.6.2.4 Receive Data Modulation - +FRM
+FRM - Receive Data Modulation
AT+FRM=<mod> Execution command causes the module to transmit facsimile data using the
modulation defined by the parameter <mod>.
Parameter:
<mod> - carrier modulation
72 - V29/7200 bps
73 - V17/7200 bps Training Long
74 - V17/7200 bps Training Short
96 - V29/9600 bps
97 - V17/9600 bps Training Long
98 - V17/9600 bps Training Short
AT+FRM=? Test command returns all supported values of the parameter <mod>.
Note: test command result is without command echo
Reference ITU T.31 and TIA/EIA-578-A specifications
3.5.6.2.5 Transmit Data With HDLC Framing - +FTH
+FTH - Transmit Data With HDLC Framing
AT+FTH=<mod> Execution command causes the module to transmit facsimile data using
HDLC protocol and the modulation defined by the parameter <mod>.
Parameter:
<mod> - carrier modulation
3 - V21/300 bps
AT+FTH=? Test command returns all supported values of the parameter <mod>.
Note: test command result is without command echo
Reference ITU T.31 and TIA/EIA-578-A specifications