Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 15 of 259
3.2.2.2 Message Service Failure Result Code - +CMS ERROR: <err>
This is NOT a command; it is the error response to +Cxxx 3gpp TS 27.005 commands
Syntax: +CMS ERROR: <err>
Parameter: <err> - numeric error code. The <err> values are reported in the table:
Numeric Format Meaning
0...127 3gpp TS 24.011 Annex E-2 values
128...255 3gpp TS 23.040 sub clause 9.2.3.22 values
300 ME failure
301 SMS service of ME reserved
302 operation not allowed
303 operation not supported
304 invalid PDU mode parameter
305 invalid text mode parameter
310 SIM not inserted
311 SIM PIN required
312 PH-SIM PIN required
313 SIM failure
314 SIM busy
315 SIM wrong
316 SIM PUK required
317 SIM PIN2 required
318 SIM PUK2 required
320 memory failure
321 invalid memory index
322 memory full
330 SMSC address unknown
331 no network service
332 network time-out
500 unknown error