Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 129 of 259
+CSAS - Save Settings
AT+CSAS=? Test command returns the possible range of values for the parameter
<profile>.
Reference 3GPP TS 27.005
3.5.5.2.7 Restore Settings - +CRES
+CRES - Restore Settings
AT+CRES
[=<profile>]
Execution command restores message service settings saved by +CSAS
command from either NVM or SIM.
Parameter:
<profile>
0 - it restores message service settings
from NVM.
1..n - it restores message service settings from SIM. The value of n
depends on the SIM and its max is 3.
Note: certain settings may not be supported by the SIM and therefore they
are always restored from NVM, regardless the value of <profile>.
Note: If parameter is omitted the command restores message service
settings from NVM.
AT+CRES=? Test command returns the possible range of values for the parameter
<profile>.
Reference 3GPP TS 27.005