Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 127 of 259
+CSMP - Set Text Mode Parameters
Reference 3GPP TS 27.005; 3GPP TS 03.40/23.040; 3GPP TS 03.38/23.038
3.5.5.2.4 Show Text Mode Parameters - +CSDH
+CSDH - Show Text Mode Parameters
AT+CSDH=
[<show>]
Set command controls whether detailed header information is shown in text
mode (AT+CMGF=1) result codes.
Parameter:
<show>
0 - do not show header values defined in commands +CSCA and +CSMP
(<sca>, <tosca>, <fo>, <vp>, <pid> and <dcs>) nor <length>, <toda>
or <tooa> in +CMT, +CMGL, +CMGR result codes for SMS-DELIVERs
and SMS-SUBMITs in text mode. For SMS-COMMANDs in +CMGR
result code do not show <pid>, <mn>, <da>, <toda>, <length> or
<cdata>
1 - show the values in result codes
AT+CSDH? Read command reports the current setting in the format:
+CSDH: <show>
AT+CSDH=? Test command reports the supported range of values for parameter
<show>
Reference 3GPP TS 27.005