Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 117 of 259
+CGEQREQ – 3G Quality Of Service Profile (Requested)
Note: a special form of the Set command, +CGEQREQ=<cid> causes the
requested profile for context number <cid> to become undefined.
AT+CGEQREQ? Read command returns the current settings for each defined context in the
format:
[+CGEQREQ: <cid>,<Traffic class>,<Maximum bitrate UL>,<Maximum
bitrate DL>,<Guaranteed bitrate UL>,<Guaranteed bitrate DL>,<Delivery
order>,<Maximum SDU size>,<SDU error ratio>,<Residual bit error
ratio>,<Delivery of erroneous SDUs>,<Transfer delay>,<Traffic
handling><CR><LF>]
[+CGEQMIN:…]
If no PDP context has been defined, it has no effect and OK result code is
returned.
AT+CGEQREQ=? Test command returns as a compound value the type of the current PDP
context and the supported values for the subparameters in the format:
+CGQREQ: <PDP_Type>,(list of supported <Traffic class>s),
(list of supported <Maximum bitrate UL>s),(list of supported <Maximum
bitrate DL>s),(list of supported <Guaranteed bitrate UL>s),(list of
supported <Guaranteed bitrate DL>s),(list of supported <Delivery
order>s),(list of supported<Maximum SDU size>s),(list of
supported<SDU error ratio>s),(list of supported<Residual bit error
ratio>s),(list of supported <Delivery of erroneous SDUs>s),(list of
supported <Transfer delay>s),(list of supported <Traffic handling
priority>s
Example AT+CGEQREQ=1,0,384,384,128,128,0,0,"0E0","0E0",0,0,0
OK
AT+CGEQREQ?
+CGEQREQ: 1,0,384,384,128,128,0,0,"0E0","0E0",0,0,0
OK
AT+CGEQREQ=?
+CGEQREQ: "IP",(0-4),(0-512),(0-16000),(0-512),(0-
16000),(0-2),(0-
1520),("0E0","1E1","1E2","7E3","1E3","1E4","1E5","1E6"),(
"0E0","5E2","1E2","5E3","4E3","1E3","1E4","1E5","1E6","6E
8"),(0-3),(0,100-4000),(0-3)
+CGEQREQ: "PPP",(0-4),(0-512),(0-16000),(0-512),(0-
16000),(0-2),(0-
1520),("0E0","1E1","1E2","7E3","1E3","1E4","1E5","1E6"),(
"0E0","5E2","1E2","5E3","4E3","1E3","1E4","1E5","1E6","6E
8"),(0-3),(0,100-4000),(0-3)
+CGEQREQ: "IPV6",(0-4),(0-512),(0-16000),(0-512),(0-