Specifications

UC864-E/G AT Commands Reference Guide

80304ST10041a Rev. 3 - 18/07/08

3.5.4.5 Mobile Equipment Errors

3.5.4.5.1 Report Mobile Equipment Error - +CMEE

+CMEE - Report Mobile Equipment Error

AT+CMEE=[<n>] Set command enables/disables the report of result code:

+CME ERROR: <err>

as an indication of an error relating to the +Cxxx commands issued.

When enabled, device related errors cause the +CME ERROR: <err> final

result code instead of the default ERROR final result code. ERROR is

anyway returned normally when the error message is related to syntax,

invalid parameters, or DTE functionality.

Parameter:

<n> - enable flag

0 - disable +CME ERROR:<err> reports, use only ERROR report.

1 - enable +CME ERROR:<err> reports, with <err> in numeric format

2 - enable +CME ERROR: <err> reports, with <err> in verbose format

AT+CMEE? Read command returns the current value of subparameter <n>:

+CMEE: <n>

AT+CMEE=? Test command returns the range of values for subparameter <n>

Note +CMEE has no effect on the final result code +CMS

Reference 3GPP TS 27.007