Specifications

UC864-E/G AT Commands Reference Guide
80304ST10041a Rev. 3 - 18/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 104 of 259
3.5.4.4.21 Available AT Commands - +CLAC
+CLAC - Available AT Commands
AT+CLAC Execution command causes the ME to return the AT commands that are
available for the user, in the following format:
<AT cmd1>[<CR><LF><AT cmd2>[…]]
where:
<AT cmdn> - defines the AT command including the prefix AT
AT+CLAC=? Test command returns the OK result code
Reference 3GPP TS 27.007
3.5.4.4.22 Delete Alarm - +CALD
+CALD - Delete Alarm
AT+CALD=<n> Execution command deletes an alarm in the ME
Parameter:
<n> - alarm index
0
AT+CALD=? Test command reports the range of supported values for <n> parameter.
Reference 3G TS 27.007