Specifications

HE863 family AT commands reference guide

80377ST10083a Rev.4 – 2012-02-01

+CALA - Alarm Management

+CALA: (list of supported <n>s),(list of supported <type>s),<tlength>,

<rlength>,(list of supported <silent>s)

Example AT+CALA="02/09/07,23:30:00+00"

Reference 3gpp TS 27.007

3.5.3.4.22. Delete Alarm - +CALD

+CALD - Delete Alarm

AT+CALD=<n>

Execution command deletes an alarm in the ME

Parameter:

<n> - alarm index

AT+CALD=?

Test command reports the range of supported values for <n> parameter.

Reference 3G TS 27.007

3.5.3.5. Mobile Equipment Errors

3.5.3.5.1. Report Mobile Equipment Error - +CMEE

+CMEE - Report Mobile Equipment Error

AT+CMEE=[<n>]

Set command enables/disables the report of result code:

+CME ERROR: <err>

as an indication of an error relating to the +Cxxx commands issued.

When enabled, device related errors cause the +CME ERROR: <err> final result

code instead of the default ERROR final result code. ERROR is anyway returned

normally when the error message is related to syntax, invalid parameters, or DTE

functionality.

Parameter:

<n> - enable flag

0 - disable +CME ERROR:<err> reports, use only ERROR report.

1 - enable +CME ERROR:<err> reports, with <err> in numeric format

2 - enable +CME ERROR: <err> reports, with <err> in verbose format

AT+CMEE?

Read command returns the current value of subparameter <n>:

+CMEE: <n>

AT+CMEE=?

Test command returns the range of values for subparameter <n>

Note +CMEE has no effect on the final result code +CMS

Reference 3GPP TS 27.007