Specifications

HE863 family AT commands reference guide
80377ST10083a Rev.4 – 2012-02-01
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 74 of 228
+CPBS - Select Phonebook Memory Storage
"SM" – SIM/UICC phonebook
"BL" - Blacklist phonebook (delete only)
“EC” - SIM emergency–call-codes phonebook (read only)
“AP” - Selected application phonebook.
“BN” – SIM/USIM barred-dialling-number phonebook (only valid with PIN2)
“SN” – SIM/USIM service-dialling-number phonebook
<password> string type value representing the PIN2-code required when selecting
PIN2-code locked
AT+CPBS?
Read command returns the actual values of the parameter <storage>, the number of
occupied records <used> and the maximum index number <total>, in the format:
+CPBS: <storage>,<used>,<total>
Where:
<storage>s above
<used> integer type value indicating the number of used locations in selected
memory
<total> integer type value indicating the total number of locations in selected
memory
AT+CPBS=?
Test command returns the supported range of values for the parameters <storage>.
This response is different according to the range supported by each USIM.
Example AT+CPBS=”SM” // current phonebook storage is SIM
AT+CPBR=1
+CPBR: 1,"0105872928",129,"James"
OK
Reference 3GPP TS 27.007
3.5.3.4.6. Read Phonebook Entries - +CPBR
+CPBR - Read Phonebook Entries
AT+CPBR=
<index1>
[,<index2>]
This execution command returns phonebook entries in location number range
<index1> <index2> from the
current phonebook memory storage selected with +CPBS. If <index2> is left out,
only location <index1> is
returned.
Note: Wildcard chracters (*, ?) in the phone number of FDN (fixed number
phonebook) are allowed.
Parameters:
<index1>, <index2> integer type values in the range of location numbers of
phonebook memory
Response syntax:
[+CPBR: