Specifications

HE863 family AT commands reference guide
80377ST10083a Rev.4 – 2012-02-01
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 69 of 228
+CPLS - Selection of preferred PLMN list +CPLS
Parameter:
<list>:
0 - User controlled PLMN selector with Access Technology EFPLMNwAcT, if
not found in the SIM/UICC then PLMN preferred list EFPLMNsel (this file
is only available in SIM card or GSM application selected in UICC) (Default)
1- Operator controlled PLMN selector with Access Technology
EFOPLMNwAcT
2 - HPLMN selector with Access Technology EFHPLMNwAcT
AT+CPLS?
Read command returns the selected PLMN selector list from the SIM/USIM
+CPLS: <list>
AT+CPLS =?
Test command returns the whole index range supported lists by the SIM./USIM
Reference 3GPP TS 27.007