Specifications

HE863 family AT commands reference guide

80377ST10083a Rev.4 – 2012-02-01

+CPOL - Preferred Operator List

selector with Access Technology EFHPLMNwAcT. Refer Appendix A for <err>

values.

Parameters:

<index> - integer type; the order number of operator in the SIM preferred operator

list

1..n

0 – long format alphanumeric <oper>

1 – short format alphanumeric <oper>

2 - numeric <oper>

<oper> - string type

<GSM_AcTn> - GSM access technology

0 – access technology not selected

1 – access technology selected

<GSM_Compact_AcTn> - GSM compact access technology

0 – access technology not selected

1 – access technology selected

<UTRA_AcTn> - UTRA acess technology

0 – access technology not selected

1 – access technology selected

Note: if <index> is given but <oper> is left out, entry is deleted. If <oper> is given

but <index> is left out, <oper> is put in the next free location. If only <format> is

given, the format of the <oper> in the read command is changed. Currently,

<GSM_Compact_AcT> is not supported but set value is acceptable.

AT+CPOL?

Read command returns all used entries from the SIM list of preferred operators.

their characteristics in the format:

+CPOL:

<index1>,<format>,<oper1>[,<GSM_AcT1>,<GSM_Compact_AcT1>,<UTR

AN_AcT1>][<CR><LF>+CPOL:

<index2>,<format>,<oper2>[,<GSM_AcT2>,<GSM_Compact_AcT2>,<UTR

AN_AcT2>] […]]

AT+CPOL=?

Test command returns the whole <index> range supported by the SIM and the

range for the parameter <format>

Reference 3GPP TS 27.007

3.5.3.3.19. Selection of preferred PLMN list - +CPLS

+CPLS - Selection of preferred PLMN list +CPLS

AT+CPLS=<list>

Set command select one PLMN selector with Access Technology list in the SIM

card or active application in the UICC(GSM or USIM), that is used by +CPOL

command.