Specifications

HE863 family AT commands reference guide

80377ST10083a Rev.4 – 2012-02-01

+CLCC - List Current Calls

]]]

[…]]]

where:

<idn> - call identification number

<dir> - call direction

0 - mobile originated call

1 - mobile terminated call

<stat> - state of the call

0 - active

1 - held

2 - dialing (MO call)

3 - alerting (MO call)

4 - incoming (MT call)

5 - waiting (MT call)

<mode> - call type

0 - voice

1 - data

2 - fax

9 - unknown

<mpty> - multiparty call flag

0 - call is not one of multiparty (conference) call parties

1 - call is one of multiparty (conference) call parties

<number> - string type phone number in format specified by <type>

<type> - type of phone number octet in integer format

129 - national numbering scheme

145 - international numbering scheme (contains thearacter "+")

<alpha> - string type; alphanumeric representation of <number> corresponding to

the entry found in phonebook; used character set should be the one

selected with +CSCS.

<priority> - optional digit type parameter indicating the eMLPP priority level of

the call, values specified in 3GPP TS 22.067

[54].

Note: If no call is active then only OK message is sent. This command is useful in

conjunction with command +CHLD to know the various call status for call holding.

AT+CLCC=?

Test command returns the OK result code

Reference 3GPP TS 27.007

3.5.3.3.16. SS Notification - +CSSN

+CSSN - SS Notification

AT+CSSN=[<n>

[,<m>]]

It refers to supplementary service related network initiated notifications.

Set command enables/disables the presentation of notification result codes from TA

to TE.