Specifications

HE863 family AT commands reference guide

80377ST10083a Rev.4 – 2012-02-01

+CUSD - Unstructured Supplementary Service Data

5 - network time out

AT+CUSD?

Read command reports the current value of the parameter <n>

AT+CUSD=?

Test command reports the supported values for the parameter <n>

Reference 3GPP TS 27.007

Note Only mobile initiated operations are supported

3.5.3.3.14. Advice Of Charge - +CAOC

+CAOC - Advice Of Charge

AT+CAOC=

<mode>

Set command refers to the Advice of Charge supplementary services that enable

subscriber to get information about the cost of calls; the command also includes the

possibility to enable an unsolicited event reporting of the Current Call Meter

(CCM) information.

Parameter:

<mode>

0 - query CCM value

1 - disables unsolicited CCM reporting

2 - enables unsolicited CCM reporting

Note: the unsolicited result code enabled by parameter <mode> is in the format:

+CCCM: <ccm>

where:

<ccm> - current call meter in home units, string type: three bytes of the CCM

value in hexadecimal format (e.g. “00001E” indicates decimal value 30)

AT+CAOC?

Read command reports the value of parameter <mode> in the format:

+CAOC: <mode>

AT+CAOC=?

Test command reports the supported values for <mode> parameter.

Reference 3GPP TS 27.007

Note +CAOC command returns an estimate of the cost of the current call only, produced

by the MS and based on the information provided by either AoCI or AOCC

supplementary services; it is not stored in the SIM.

3.5.3.3.15. List Current Calls - +CLCC

+CLCC - List Current Calls

AT+CLCC

Execution command returns the list of current calls and their characteristics in the

format:

[+CLCC: <id1>, <dir>, <stat>,

<mode>,<mpty>[,<number>,<type>[,<alpha>[,<priority>]]]

[<CR><LF>+CLCC: