Specifications

HE863 family AT commands reference guide

80377ST10083a Rev.4 – 2012-02-01

+COPS - Operator Selection

1 GSM Compact

2 UTRAN

Note: since with this command a network scan is done, this command may require

some seconds before the output is given.

Example

AT+COPS?

+COPS: 0,0,"Test PLMN 1-1",0

at+cops=?

+COPS: (2,"","","45008",2),(1,"Test PLMN 1-1","Test1-

1","00101",0),(3,"","","45005",2),,(0-4),(0-2)

Reference 3GPP TS 27.007

3.5.3.3.5. Facility Lock/Unlock - +CLCK

+CLCK - Facility Lock/Unlock

AT+CLCK=

[,<passwd>

[,<class>]]

This command is used to lock, unlock or interrogate a MT or a network facility

<fac>. Password is normally

needed to do such actions.

Parameters:

<fac> values reserved by the present document:

“SC” SIM(lock SIM/UICC card) (SIM/UICC asks password

in MT power-up and when this lockcommand issued)

“AO” BAOC (Barr All Outgoing Calls)

“OI” BOIC (Barr Outgoing International Calls)

“OX” BOIC-exHC (Barr Outgoing International Calls except to Home

Country)

“AI” BAIC (Barr All Incoming Calls)

“IR” BIC-Roam (Barr Incoming Calls when Roaming outside the home

country)

“AB” All Barring services

“AG” All outgoing barring services

“AC” All incoming barring services

“FD” SIM card or active application in the UICC (GSM or USIM) fixed

dialling memory feature (if PIN2 authentication has not been done

during the current session, PIN2 is required as <passwd>)

“PS” PH-SIM (lock Phone to SIM card)

"PN" network Personalisation

"PU" network subset Personalisation

"PP" service Provider Personalization (refer 3GPP TS 22.022 [33])

"PC" Corporate Personalization (refer 3GPP TS 22.022 [33])

"PF" lock Phone to the very First inserted SIM/UICC card (also referred in

the present document as PH-FSIM) (MT asks password when other than