Specifications

HE863 family AT commands reference guide
80377ST10083a Rev.4 – 2012-02-01
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 222 of
228
#STIA – SIMTOOLKIT Activation Interface
wrong client
- other responses see GSM 11.11
AT#STIA?
Read command returns the SIMTOOLKIT mode and device path parameters in
NVM.
#STIA=<mode>, <devpath>
AT#STIA?
Test command returns the supported range of values for parameters
#STIA=<mode>, <devpath>
3.5.5.5.2. SIMTOOLKIT Browser Request - +STKBR
+STKBR – SIMTOOLKIT Browser Request
AT+STKBR=
<result>,[<add result
>]
This command allows to enter a response to a SIM -APPL-TK launch browser
request. The SIMAP command Launch Browser is sent to the DTE using the
unsolicited result code:
+STKLBR: <cmd_details>,<URL>,[<bearer>],[gateway],[<Ref_1>], … ,[Ref_n].
Parameters:
<result> terminal response result
<add result> additional result
Defined values
<cmd_details>: describes in which way the browser should be launched.
- 00 launch browser, if not already launched
- 02 use the existing browser (the browser shall not use the active existing secured
session) ;
- 03 close the existing browser session and launch new browser session;
<URL> URL that shall be loaded
<bearer>
- '00' SMS
- '01' CSD
- '02' USSD
- '03' GPRS
<gateway>: This text gives to the mobile the name/identity of the Gateway/Proxy to
be used for connecting to the URL.
<Ref_1>,.. <Ref_n> Provisioning File Reference
<result> see command +STKTR
<add_result> see command +STKTR
AT+STKBR=?
Test command returns the OK result code
3.5.5.5.3. SIMTOOLKIT Terminla Response - +STKTR
+STKTR – SIMTOOLKIT Terminal Response