Specifications

HE863 family AT commands reference guide
80377ST10083a Rev.4 – 2012-02-01
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 221 of
228
#STIA – SIMTOOLKIT Activation Interface
- 12: negative acknowledgement or error tone
<total items> total items
<unit> may be:
- 0: minutes
- 1: seconds
- 2: tenth of seconds
<URL> URL that shall be loaded
[URC type 2 : +STKCC]
SIM-APPL-TK Call Control Commands +STKCC
The SIMAP call control status is displayed using the unsolicited result code
+STKCC: <cc_comand>… defined as:
- +STKCC: 1,<res_val>,<alpha>,<number>
- +STKCC: 2,<res_val>,<alpha>,<ss_code>
- +STKCC: 3,<res_val>,<alpha>,<ussd_code>
- +STKCC: 4,<res_val>,<alpha>,<ton_npi>,<sc_addr>,<ton_npi>,<dest_addr>
Defined values
<cc_command> may be:
- 1: set up call
- 2: send SS
- 3: send USSD
- 4: send SM
<res_val> call control result value
<alpha> text string
<number> called party number
<ton_npi> type of number and numbering plan
<sc_addr> service centre address
<dest_addr> destination address
[URC type 3 : +STKCNF]
SIM-APPL-TK Proactive Session Status +STKCNF
The SIMAP proactive session status is displayed using the unsolicited result code
+STKCNF: <proactive_cmd>,<result>,<add_result>,<sw1>
Defined values
<proactive_cmd> decimal code indicates the command that was finished (refer
+STKPRO)
<result> general result code
<add_result> additional result code
<sw1> status of the last response may be:
- 0: command to SIM was suppressed because of multiple terminal response or