Specifications

HE863 family AT commands reference guide
80377ST10083a Rev.4 – 2012-02-01
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 218 of
228
$GPSNMUN - Unsolicited NMEA Data Configuration
<GSA> - Global Positioning System Fix Data
0 - disable (default)
1 – enable
<GSV> - GPS Satellites in View
0 - disable (default)
1 – enable
<RMC> - Global Positioning System Fix Data
0 - disable (default)
1 – enable
<VTG> - Global Positioning System Fix Data
0 - disable (default)
1 – enable
AT$GPSNMUN?
Read command returns whether the unsolicited GPS NMEA data streaming
is currently enabled or not, along with the NMEA sentences availability
status, in the format:
$GPSNMUN:<enable>,<GGA>,<GLL>,<GSA>,<GSV>,<RMC>,<VTG>
AT$GPSNMUN=?
Test command returns the supported range of values for parameters
$GPSNMUN: <enable>,<GGA>,<GLL>,<GSA>,<GSV>,<RMC>,<VTG>
Example AT$GPSNMUN=1,1,0
OK
These sets the GGA as available sentence in the unsolicited message
AT$GPSNMUN=0
OK
Turn-off the unsolicited mode
AT$GPSNMUN?
$GPSNMUN: 0,0,0,0,0,0,0
OK
3.5.5.5. SIMTOOLKIT AT Commands Set
3.5.5.5.1. SIMTOOLKIT Activation Interface - #STIA
#STIA – SIMTOOLKIT Activation Interface
AT#STIA=
<mode>,[<devpath>]
Execution command stores the current SIMTOOLKIT mode parameter and
set command sets the port output SIMTOOLKIT notification data in the NVM of
the device
Parameters:
<mode>
0 - disable SAT (no <timeout> required, if given will be ignored)
1 - enable SAT without unsolicited indication +STKPRO (default)
2 - enable SAT and extended unsolicited indication +STKPRO