Specifications

HE863 family AT commands reference guide
80377ST10083a Rev.4 – 2012-02-01
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 193 of
228
#SKTCT - Socket TCP Connection Time-Out
Note: The time for activate the GPRS and resolving the name with the DNS query
(if the peer was specified by name and not by address) is not counted in this time-
out.
AT#SKTCT?
Read command reports the current TCP connection time-out.
AT#SKTCT=?
Test command returns the allowed values for parameter <tout>.
Example AT#SKTCT=600
OK
socket first connection answer time-out has been set to 60 s.
AT#SKTCT=
OK
If there is no time-out value, set by default(60s).
3.5.5.1.72. Socket Parameters Save - #SKTSAV
#SKTSAV - Socket Parameters Save
AT#SKTSAV
Execution command saves the actual socket parameters in the NVM of the device.
The socket parameters to store are:
- User ID
- Password
- Packet Size
- Socket Inactivity Time-Out
- Data Sending Time-Out
- Socket Type (UDP/TCP)
- Remote Port
- Remote Address
- TCP Connection Time-Out
AT#SKTSAV=?
Test command returns the OK result code.
Example AT#SKTSAV
OK
socket parameters have been saved in NVM
Note If some parameters have not been previously specified then a default value will be
stored.
3.5.5.1.73. Socket Parameters Reset - #SKTRST
#SKTRST - Socket Parameters Reset
AT#SKTRST
Execution command resets the actual socket parameters in the NVM of the device
to the default ones.
The socket parameters to reset are:
- User ID
- Password
- Packet Size
- Socket Inactivity Time-Out