Specifications

HE863 family AT commands reference guide
80377ST10083a Rev.4 – 2012-02-01
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 186 of
228
#MWI - Message Waiting Indication
where:
<status>
0 - no waiting message indicator is currently set: if this the case no other
information is reported
1 - there are waiting messages related to the message waiting indicator
<indicator>.
<indicator>
1 - either Line 1 (CPHS context) or Voice (3GPP context)
2 - Line 2 (CPHS context)
3 - Fax
4 - E-mail
5 - Other
<count> - message counter: number of pending messages related to the message
waiting indicator <indicator> as it is stored on SIM.
AT#MWI?
Read command reports wheter the presentation of the message waiting indicator
URC is currently enabled or not, and the current status of the message waiting
indicators as they are currently stored on SIM. The format is:
#MWI: <enable>,<status>[,<indicator>[,<count>][<CR><LF>
#MWI: <enable>,<status>,<indicator>[,<count>][...]]]
AT#MWI=?
Test command returns the range of available values for parameter <enable>.
3.5.5.1.61. Set Voice Mail Number- +XSVM
+XSVM – Set Voice mail Number
AT+XSVM=<line>,<i
ndex>,<mode>[,<num
ber[,<type>]]
Set Command is used to set the number to the voice mail server.
Parameter:
<line>
1- line 1
2- line 2
<index>
1- home network voice mail number
2- roaming voice mail number
<mode>
0- disable the voice mail number
1- enable the voice mail number
<number> string type (0…9,+) containing the phone number
<type>integer type indicating the type of address octet as follows:
may be: 128-255
meaningful values:
129- ISDN / telephony numbering plan, national / international unknown
145- ISDN / telephony numbering plan, international number
AT+ XSVM?
Read command returns the currently selected voice mail number and the status.
+XSVM:
<line1>,<index1>,<mode1>,<number1>,<type1>
<CR><LF>+XSVM: