Specifications

HE863 family AT commands reference guide
80377ST10083a Rev.4 – 2012-02-01
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 177 of
228
#DBGS – Debug screen command
representation of the timeout value for periodic updating in decihours; range 0-255
(8 bits); 10.5.2.11 GSM04.08
<RAC> - Routing Area Code, range 0-1 (i bit);10.5.2.37b GSM04.08
<NCO> - NETWORK_CONTROL_ORDER (GPRS_Cell_Options), range 0-3
(2 bits); 10.5.2.37b GSM04.08
<NOM>NETWORK OPERATION MODE (GPRS_Cell_Options), range 0-3
(2 bits); 10.5.2.37b GSM04.08
<T3192>T3192 (Wait for Release of the TBF after reception of the final block),
12.24 GSM04.60 (range 0x0000 - 0xFFFF, 0xFFFF means invalid value)
<PBCCH> - PBCCH present, boolean; 11.2.25 GSM04.60
<rat> - currently selected Radio Access Technologie (RAT) and may be:
"UMTS"
"GSM"
<rrc_state> - may be "CD", "CF", "CP", "UP", "ID", "ST"- standing for
CELL_DCH (0), CELL_FACH(1), CELL_PCH(2), URA_PCH(3), IDLE(4),
START(5)
<urrcdc_state> - indicated by three hex digits, (octet1,2:event, 3:state)
<urrcbp_state> - indicated by four hex digits, (1,2:event, 3,4:state)
<urrcm_state> - indicated by three hex digits (1:event, 2:state, 3:nr of sent
measurements)
<release_cause> - integer, range 0-99
<dl_frequency> - integer, range 0-16383
<ciphering> - the GSM Ciphering may be 0-1
<gprs_ciphering> - It is the GPRS Ciphering Algorithm GEA1 - GEA7
<ps_data_transfered> - may be 0-1
<power_saving_mode> - may be 0-1
<scrambling_code> - integer, range 0-511
<rscp> - Received Signal Code Power (dBm - absolute value)
<ecno> - energy per chip/noice, range 0-24
<band>
"D" - DCS 1800 MHz
"P" - PCS 1900 MHz
"G" - GSM bands: 900 MHz, 850 MHz
ā€œUā€ - UMTS bands
<arfcn> - absolute radio frequency channel number, range 0-1023
<rssi> - radio signal strength in steps 0..63
<bsic> - base station identify code, range 0-3Fh (6 bits)
<reselection_reason> - integer, range 0-99
<c1> - integer, range 0-99 (6.4 GSM04.08)
<c2> - integer, range 0-99 (6.4 GSM04.08)
<mm_state> - integer, range 0-99