Specifications

ManualsBrandsRockwell ManualsComputer equipmentRC336D

161

162

163

164

165

166

167

168

169

170

HE863 family AT commands reference guide

80377ST10083a Rev.4 – 2012-02-01

228

#CGED – GPRS cell environment description

<dtr_used> - DTX used, range 0-1;

<t3212> - T3212. The T3212 timeout value field is coded as the binary

representation of the timeout value for periodic updating in decihours; range 0-255

(8 bits); 10.5.2.11 GSM04.08

<acc> - Access control class (RACH Control Parameters), range 0-65535 (2

octets); 10.5.2.29 GSM04.08

<t_adv> - Timing Advance, not used, always FFh

<bs_pa_mfrms> - BS_PA_MFRMS (multiframes period for transmission of

PAGING REQUEST), range 0-7 mapped to 2-9; 10.5.2.11 GSM04.08

<amr_acs> - AMR active codec

<amr_cod_dl> - AMR codec used in DL

<amr_cod_ul> - AMR codec used in UL

<amr_ci_i> - AMR C/I in dB/2

<mean_bep_8psk> - MEAN_BEP_8PSK[0...31]

<cv_bep_8psk> - CV_BEP_8PSK[0...7]

<mean_bep_gmsk> - MEAN_BEP_GMSK[0...31]

<cv_bep_gmsk> - CV_BEP_GMSK[0...7]

GPRS-Parameters:

<GPRS_sup> - GPRS supported (in serving cell); range 0-255 (8 bits);

10.5.2.37b GSM04.08

<RAC> - Routing Area Code, range 0-1 (i bit);10.5.2.37b GSM04.08

<Split_Pg_Cycle> - SPGC_CCH_SUP split pg_cycle on ccch by network, range 0-

1 (2 bits); 10.5.2.37b GSM04.08

<NCO> - NETWORK_CONTROL_ORDER (GPRS_Cell_Options), range 0-3 (2

bits); 10.5.2.37b GSM04.08

<NOM> - NETWORK OPERATION MODE (GPRS_Cell_Options), range 0-3 (2

bits); 10.5.2.37b GSM04.08

<T3192> - T3192 (Wait for Release of the TBF after reception of the final block),

range 0-7 mapped to 0-1500 msec (3 bits); 12.24 GSM04.60:

500 msec

1000 msec

1500 msec

0 msec

80 msec

120 msec

200 msec

<Acc_Burst_type> - ACCESS_BURST_TYPE (Literal AB_8 and AB_11),

range 0-1 mapped to 8,11 (1 bit); 12.24 GSM04.60

<DRX_Timer_Max> - DRX_TIMER_MAX, range 0-7 (3 bits); 12.24 GSM04.60

<PBCCH> - PBCCH present, boolean; 11.2.25 GSM04.60

<Ext_Measure_Order> - EXT_MEASUREMENT_ORDER, range 0-3 (2 bits);

11.2.23 GSM04.60

<PSI1_r_per> - PSI1_REPEAT_PERIOD, range 0-15 mapped to 1-16 (4 bits);

11.2.18 GSM04.60

<si14_location>

“BCCH_NORM”