Specifications

ManualsBrandsRockwell ManualsComputer equipmentRC336D

161

162

163

164

165

166

167

168

169

170

HE863 family AT commands reference guide

80377ST10083a Rev.4 – 2012-02-01

228

#CGED – GPRS cell environment description

<RxLevFull> - Received signal strength on serving cell, measured on all slots; 0h-

3Fh; 10.5.2.20 GSM04.08

<RxLevSub> - Received signal strength on serving cell, measured on all slots; 0h-

3Fh; 10.5.2.20 GSM04.08

<RxQualFull> - Received signal quality on serving cell, measured on all slots;

range 0-7; 10.5.2.20 GSM04.08

<RxQualSub> - Received signal qual.onserving cell, measured on a subset of slots,

range 0-7;10.5.2.20 GSM04.08

<ms_txpwr> - Maximum TX power level an MS may use when accessing the

system until otherwise commanded, range 0-31; 10.5.2.4 GSM08.08

<rx_acc_min> - RXLEV-ACCESS-MIN, range 0-63; 10.5.2.4 GSM04.08

<cbq> - CELL_BAR_QUALIFY, range 0-1; 10.5.2.34 GSM04.08

<cba> - CELL_BAR_ACCESS, range 0-1; 10.5.2.29 GSM04.08

<cs_valid> - True if all parameter for calculation of c2 are available; boolean

<cr_offset> - CELL_RESELECT_OFFSET, range 0-63 (6 bit); 10.5.2.34

GSM04.08

<tmp_offset> - TEMPORARY_OFFSET, range 0-7 mapped to 0-70; 10.5.2.34

GSM04.08

<penalty_t> - Penalty time, range 0-31; 10.5.2.34 GSM04.08

<c1> - Value of c1; 6.4 GSM04.08

<c2> - Value of c2; 6.4 GSM04.08

<ch_type> - Channel type of the current connection as follows (10.5.2.5

GSM04.08) see type T_CHANNEL_MODE):

0 - INVALID_CHN_TYPE

1 - TCH_F

2 - TCH_F

3 - SDCCH_4

4 - SDCCH_8

5 - TCH_H_H

6 - TCH_F_M

<ch_mode> - Channel mode of current connection (10.5.2.6 GSM04.08), range 0-

255 mapped to an internal value:

0 - MODE_SIG_ONLY

1 - MODE_SPEECH_F

2 - MODE_SPEECH_H

3 - MODE_DATA_96_F

4 - MODE_DATA_48_F

5 - MODE_DATA_48_H

6 - MODE_DATA_24_F

7 - MODE_DATA_24_H

8 - MODE_SPEECH_F_V2

9 - MODE_SPEECH_F_V3

10 - MODE_SPEECH_H_V2

11 - MODE_SPEECH_H_V3

12 - MODE_DATA_144_F

<txpwr> - Transmit power level of the current connection, range 0-31 (5 bits);

10.5.2.4 GSM04.08

<dtx_used> - DTX used, range 0-1; 10.5.2.4 GSM04.08