Specifications

HE863 family AT commands reference guide
80377ST10083a Rev.4 – 2012-02-01
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 142 of
228
#MONI - Cell Monitor
0..7
<lac> - localization area code
<id> - cell identifier
<arfcn> - assigned radio channel
<dBm> - received signal strength in dBm
<timadv> - timing advance
<psc> - primary synchronisation code
<rscp> - Received Signal Code Power in dBm
<ecio> - chip energy per total wideband power in dBm
<uarfcn> - UMTS assigned radio channel
<drx> - Discontinuous reception cycle length
<scr> - Scrambling code
Note: TA: <timadv> is reported only for the serving cell.
AT#MONI=?
Test command reports the maximum number of cells, in a neighbour of the serving
cell excluding it, from which we can extract GSM/WCDMA-related information,
along with the ordinal number of the current selected cell, in the format:
#MONI: (<MaxCellNo>,<CellSet>)
where:
<MaxCellNo> - maximum number of cells, in a neighbour of the serving cell and
excluding it, from which we can extract GSM-related information.
This value is always 6.
<CellSet> - the last setting done with command #MONI.
Note The refresh time of the measures is preset to 3 sec.
The timing advance value is meaningful only during calls or GPRS transfers active.
3.5.5.1.14. Read Current Network Status - #RFSTS
#RFSTS – Read current network Status
AT#RFSTS
Read current status in the format
(GSM network)
#RFSTS:
<PLMN>,<ARFCN>,<RSSI>,<LAC>,<RAC>,<TXPWR>,<MM>,<RR>,<NOM>,
<CID>,<IMSI>,<NetNameAsc>,<SD>,<ABND>[CR,LF] [CR,LF]
Parameter GSM Example description
PLMN "450 05" Country code and operator code(MCC,
MNC)
ARFCN 114 GSM Assigned Radio Channel
RSSI -67 Received Signal Strength Indication
LAC 2011 Localization Area Code
RAC 11 Routing Area Code
TXPWR 1 Tx Power
MM 19 Mobility Management
RR 0 Radio Resource