Specifications

HE863 family AT commands reference guide

80377ST10083a Rev.4 – 2012-02-01

3.1. Definitions

The following syntactical definitions apply:

<CR> Carriage return character, is the command line and result code terminator character,

which value, in decimal ASCII between 0 and 255,is specified within parameter S3.

The default value is 13.

<LF> Linefeed character, is the character recognised as line feed character. Its value, in

decimal ASCII between 0 and 255, is specified within parameter S4. The default

value is 10. The line feed character is output after carriage return character if verbose

result codes are used (V1 option used ) otherwise, if numeric format result codes are

used (V0 option used) it will not appear in the result codes.

<...> Name enclosed in angle brackets is a syntactical element. They do not appear in the

command line.

[...] Optional subparameter of a command or an optional part of TA information response

is enclosed in square brackets. Brackets themselves do not appear in the command

line. When subparameter is not given in AT commands which have a Read command,

new value equals to its previous value. In AT commands which do not store the

values of any of their subparameters, and so have not a Read command, which are

called action type commands, action should be done on the basis of the recommended

default setting of the subparameter.