Specifications

HE863 family AT commands reference guide
80377ST10083a Rev.4 – 2012-02-01
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 102 of
228
+CGPADDR - Show PDP Address
OK
Reference 3GPP TS 27.007
3.5.3.7.12. 3G Quality of Service Profile (Negotiated) - +CGEQNEG
+CGEQNEG – 3G Quality Of Service Profile (Negotiated)
AT+CGEQNEG=
[<cid>[,<cid>[,…]]]
This command allow the TE to retrieve the negotiated 3G quality of service
profiles returned in the Activate PDP Context Accept message.
Set command returns the negotiated 3G QoS profile for the specified context
identifiers, <cid>s. The Qos profile consists of a number of parameters, each of
which may have a separate value.
Parameters:
<cid> - PDP context identification (see +CGDCONT command).
AT+CGEQNEG=?
Test command returns a list of <cid>s associated with active contexts.
Example
AT+CGEQREQ?
+CGEQREQ: 1,4,0,0,0,0,2,0,"0E0","0E0",3,0,0
OK
AT+CGACT=1,1
OK
T+CGEQNEG=?
+CGEQREQ: (1)
OK
AT+CGEQNEG=1
+CGEQNEG: 1,3,128,384,0,0,2,1500,"1E4","1E5",3,0,1
OK
Reference 3GPP TS 27.007; 3GPP TS 03.60/23.060; 3GPP TS 24.008
3.5.3.7.13. Enter Data State - +CGDATA
+CGDATA - Enter Data State
AT+CGDATA=
[<L2P>[,<cid>]
Execution command causes to perform whatever actions are necessary to establish a
communication with the network using one or more GPRS PDP types.