User Manual

1-4 WebPakCS Software V1.0
1.8 Terms Used in This Manual
The following terms are used throughout this manual:
1.9 Where to Find Additional Information
See the following instruction manuals for more information about the drives that can
be config ured us ing the WebPak CS sof tware:
• D2-3443 WebPak 3000 DC Drive Hardware Reference, Installation, and
Troubleshooting
• D2-3444 WebPak 3000 DC Drive Software Reference Manual
• D2-3345 WebPak 3000 Operator Interface Module (OIM) User Guide
• D2-3446 WebPak 3000 DC Drive Application Workbook
Table 1.2 – Term s
Term Definition
WebPakCS software The software used to configure, monitor, and operate
the WebPak 3000 drive.
CD-ROM drive The personal computer’s CD-ROM drive.
COM port Communication port.
configuration file Drive configurations stored on the personal computer
that can only be read and written to by the WebPakCS
software.
drive The Power Module and regulator combination that
controls a motor.
Drives can be configured using the WebPakCS
software.
dri ve configuration The set of drive parameters and assi gnm ent values
that specify how the drive runs.
hard drive The personal computer’s hard disk drive.
opened configuration The configuration that is active in the WebPakCS
software.