User Manual

8-2
WebPak 3000 DC Drive Application Workbook, Version 1.1
▲
Run the drive as a speed regulator long enough to stabilize the mechanical
characteristics of the load (bearings, couplings, etc.).
▲
Set the speed reference to 10% of
TOP LINE SPEED
(P.020).
▲
Run the drive and adjust
FRICTION LOSS
(P.123) until the speed loop
PI
output
SPD LOOP OUTPUT
(P.299) is zero.
▲
Set the speed reference to 100% of
TOP LINE SPEED
(P.020).
▲
Run the drive and adjust
WINDAGE LOSS
(P.243) until
SPD LOOP OUTPUT
(P.299)
is zero.
Range: 0.0 to 50.0%
P.123 =
%
Range: 0.0 to 50.0%
P.243 =
%