User Manual

8-10
Installing and Operating the VSM500 Integrated Drive/Motor, Version 3.0
When the switch in position 8 is ON, the minimum speed will be determined as shown
in the following table:
Control Terminal Block Slide Switch Position 8 = ON
Terminal 8
Status
Terminal 9
Status
Terminal 10
Status Minimum Speed Setting
Open Open Open 0 RPM (0 Hz)
Open Open Closed 150 RPM (5 Hz)
Open Closed Open 300 RPM (10 Hz)
Open Closed Closed 600 RPM (20 Hz)
Closed Open Open 900 RPM (30 Hz)
Closed Open Closed 1200 RPM (40 Hz)
Closed Closed Open 1500 RPM (50 Hz)
Closed Closed Closed 1800 RPM (60 Hz)
Figure 8.6 – Wiring Minimum Speed
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Min Speed 0
Min Speed 1
Min Speed 2
24V DC
= Maintained Contact - Open
20