User Manual

2 TL-Series Servo Motor Instal lation Instructions
Publication TL-IN001C-EN-P — March 2005
Receiving and Storage
The customer is responsible for inspecting the equipment before accepting the
shipment from the freight company. Check the item(s) you receive against your
purchase order. Notify the carrier of shipping damage or missing items
immediately. Store your motor in a clean and dry location within the following
environmental conditions:
Environmental Ratings
The TL-Series motors, connectors, and flying leads are separately rated for
environmental protection per Ingress Protection standards (IP ratings).
Environmental Condition Description
Storage Temperature -10° to 85° C (14° to 185° F)
Relative Humidly 20% to 85% non-condensing
Atmosphere non-corrosive
TL-Series Motor
Rating Description
1
Motor with optional shaft seal
2
IP65 dust tight, water jets
Motor without a shaft seal, and
the mounted in the direction:
shaft down
shaft horizontal
shaft up
IP53
IP51
IP50
dust protected, spraying water
dust protected, vertically falling water
dust protected, no special moisture protection
Flying leads and connectors IP30 protected from objects greater than 12.5 mm (0.5 in.)
in diameter, no special moisture protection
1 IP rating descriptions are for reference only. Refer to the international standards for more complete rating descriptions.
2 An optional shaft seal kit is required to provide the IP65 rating. See Accessories on page 21.