Manual
Trusted
TM
PD-TC300
Issue 13 Oct 11 PD-TC300 1
Trusted
TM
Communications Cables
Introduction
This document provides detailed information for the types of Trusted
TM
Communications Cables
currently available. These are listed in Table 1 below.
Cable Type Description
TC-301-01-xmx Local Expansion Cable
From Expander Interface Adapter (T8312) to Expander Processor (T8310)
TC-301-02-xmx Local Expansion Cable
From Expander Interface Adapter (T8312) to Expander Processor (T8310)
TC-302-01-xmx Remote Expansion Cable
From Expander Interface Adapter (T8312) to Fibre Tx/Rx unit (T8314)
TC-302-02-xmx Remote Expansion Cable
From Expander Interface Adapter (T8312) to Fibre Tx/Rx unit (T8314)
TC-303-01-xmx Remote Expansion Cable
From Fibre Tx/Rx unit (T8314) to Expander Processor (T8310)
TC-303-02-xmx Remote Expansion Cable
From Fibre Tx/Rx unit (T8314) to Expander Processor (T8310)
TC-304-01-xmx Maintenance Cable
TC-305-01-xmx Communications Cable Assembly
From Communication Interface (T8151) to flying leads
TC-305-02-xmx Communications Cable Assembly
From Communication Interface (T8151) to flying leads
TC-306-02-2m5 Input Smart Slot Jumper Cable
TC-308-02-2m5 Output Smart Slot Jumper Cable
TC-310-02-2m5 8472 Output Smart Slot Jumper Cable
TC-311-01-xmx Local Expansion Cable Assembly
TC-311-02-xmx Local Expansion Cable Assembly
TC-312-01-xmx Local Expansion Cable Assembly
TC-312-02-xmx Local Expansion Cable Assembly
TC-313-01-xmx Local Expansion Cable Assembly
TC-313-02-xmx Local Expansion Cable Assembly
TC-314-02-xmx Expander Electrical Extension Cable
TC-320-01-xmx TMR Interface Cable (Module to Plug)
TC-321-01-xmx TMR Interface Cable (Module to Socket)
TC-322-02 - xmx CS300 / SC300E Interface Cable
Table 1 Trusted
TM
Communications Cables
The -01 / -02 on the cable part number for the above cables dictates the properties of the cable.
• 01 Provides a cable whose outer sheath is PVC
• 02 Provides a cable whose outer sheath is Low smoke zero halogen, flame retardant to IEC
60332-3 Cat A.
The cables are manufactured to standard integration requirements, only the type of cable insulation
must be specified. For non standard lengths, length must be specified to the nearest 0.5m in the
format xmx, e.g. 2m0 for a cable length of 2.0m. This detail must be added to the end of the part
number. The Maintenance cables are supplied with PVC sheathed cables only. When ordering cables,
it is recommended that the user supplies the details as shown in Table 1.