TrustedTM PD-T8835 TrustedTM 60 Channel Analogue Input FTA Non Incendive Introduction The TrustedTM 60 Channel Analogue Input FTA Non-Incendive is designed to act as the main interface between a non-incendive field device in a hazardous area generating a 4-20mA analogue signal and the TrustedTM Dual Analogue Input Module T8432. Features • 60 input channels per FTA. • Industry standard field device connections (2-wire). • Limited power for connection to nonincendive field wiring.
TrustedTM Analogue Input FTA Non Incendive T8835 Issue Record Issue Number Date Revised by Technical Check Authorised by Modification 1 Aug 08 N Owens A Holgate P Stock Initial Issue Issue 1 Aug 08 PD-T8835 2
TrustedTM Analogue Input FTA Non Incendive T8835 This page is intentionally blank Issue 1 Aug 08 PD-T8835 3
TrustedTM Analogue Input FTA Non Incendive T8835 Table of Contents 1. Description ...................................................................................................................................7 2. Installation ....................................................................................................................................8 3. Associated Cable Selection .........................................................................................................8 4.
TrustedTM Analogue Input FTA Non Incendive T8835 Notice The content of this document is confidential to ICS Triplex Technology Ltd. companies and their partners. It may not be given away, lent, resold, hired out or made available to a third party for any purpose without the written consent of ICS Triplex Technology Ltd. This document contains proprietary information that is protected by copyright. All rights are reserved.
TrustedTM Analogue Input FTA Non Incendive T8835 Revision and Updating Policy All new and revised information pertinent to this document shall be issued by ICS Triplex Technology Ltd. and shall be incorporated into this document in accordance with the enclosed instructions. The change is to be recorded on the Amendment Record of this document.
TrustedTM Analogue Input FTA Non Incendive T8835 1. Description The TrustedTM 60 Channel Analogue Input FTA T8835 provides termination for a maximum of 60 input channels from various types of field devices which generate an analogue signal. Figure 1 below shows the configuration of a single channel.
TrustedTM Analogue Input FTA Non Incendive T8835 2. Installation The TrustedTM 60 Channel Analogue Input FTA T8835 Non Incendive is designed to be mounted on either of the TS32 or TS35 DIN rails in the horizontal or vertical positions as required. 3.
TrustedTM Analogue Input FTA Non Incendive T8835 4. Assembly Pinout Connections 4.1.
TrustedTM Analogue Input FTA Non Incendive T8835 4.2. PL1 Connections Pin Service 1 24V-1V 2 0V 3 0V 4 24V-2 Table 2 PL1 Connections 4.3.
TrustedTM Analogue Input FTA Non Incendive T8835 4.5.
TrustedTM Analogue Input FTA Non Incendive T8835 4.7.
TrustedTM Analogue Input FTA Non Incendive T8835 4.9.
TrustedTM Analogue Input FTA Non Incendive T8835 4.11. PL10 Connections Pin Service 1 Channel 0 2 Channels 61 Table 11 PL10 Connections 4.12.
TrustedTM Analogue Input FTA Non Incendive T8835 4.13.
TrustedTM Analogue Input FTA Non Incendive T8835 5. Specifications Field Supply Range 18 to 32V dc Maximum Normal Output Current Isc (Field Supply) 81mA Maximum Normal Output Voltage Voc (Field Supply) 32V as voltage range above Maximum External Capacitance Ca 5µF for methane, 0.3µF for groups A and B, in accordance with AANSI/ISA 12.12.01-2000 Maximum External Inductance La 10mH for methane or group B, in accordance with AANSI/ISA 12.12.
TrustedTM Analogue Input FTA Non Incendive T8835 This page intentionally blank Issue 1 Aug 08 PD-T8835 17
