TrustedTM PD-T8832 TrustedTM 60 Channel Analogue Input FTA Introduction TM The Trusted 60 Channel Analogue Input FTA T8832 is designed to act as the main interface TM between a field device generating a 4-20mA analogue signal and the Trusted Dual Analogue Input Module T8432. Features • 60 input channels per FTA. • Industry standard field device connections (2-wire). • Standard DIN rail compatibility. • Simple installation and connection. • 24V dc operation.
TrustedTM Analogue Input FTA T8832 Issue Record Issue Number Date Revised by 7 Sep 05 J W Clark Issue 7 Sep 05 Technical Check Authorised by Modification Format PD-T8832 2
TrustedTM Analogue Input FTA T8832 Figure 1 T8832 Layout Issue 7 Sep 05 PD-T8832 3
TrustedTM Analogue Input FTA T8832 Table of Contents 1. Description ...................................................................................................................................7 2. Installation....................................................................................................................................8 3. Associated Cable Selection .........................................................................................................8 4.
TrustedTM Analogue Input FTA T8832 Notice The content of this document is confidential to ICS Triplex Technology Ltd. companies and their partners. It may not be given away, lent, resold, hired out or made available to a third party for any purpose without the written consent of ICS Triplex Technology Ltd. This document contains proprietary information that is protected by copyright. All rights are reserved.
TrustedTM Analogue Input FTA T8832 Revision and Updating Policy All new and revised information pertinent to this document shall be issued by ICS Triplex Technology Ltd. and shall be incorporated into this document in accordance with the enclosed instructions. The change is to be recorded on the Amendment Record of this document.
TrustedTM Analogue Input FTA T8832 1. Description TM The Trusted 60 Channel Analogue Input FTA T8832 provides termination for a maximum of 60 input channels from various types of field devices which generate an analogue signal. Figure 2 below shows the configuration of a single channel. Figure 2 Single Channel Schematic The field supply is derived from dual 24V dc feeds which are ‘commoned’ via diodes on the FTA. The TM supply is then fed to each channel.
TrustedTM Analogue Input FTA T8832 2. Installation TM The Trusted 60 Channel Analogue Input FTA T8832 is designed to be mounted on either of the TS32 or TS35 DIN rails in the horizontal or vertical positions as required. 3.
TrustedTM Analogue Input FTA T8832 4. Assembly Pinout Connections 4.1.
TrustedTM Analogue Input FTA T8832 4.2. PL1 Connections Pin Service 1 24V-1V 2 0V 3 0V 4 24V-2 Table 2 PL1 Connections 4.3.
TrustedTM Analogue Input FTA T8832 4.5.
TrustedTM Analogue Input FTA T8832 4.7.
TrustedTM Analogue Input FTA T8832 4.9.
TrustedTM Analogue Input FTA T8832 4.11. PL10 Connections Pin Service 1 Channel 0 2 Channels 61 Table 11 PL10 Connections 4.12.
TrustedTM Analogue Input FTA T8832 4.13.
TrustedTM Analogue Input FTA T8832 5.
TrustedTM Analogue Input FTA T8832 This page intentionally blank Issue 7 Sep 05 PD-T8832 17
