User guide

Trusted
TM
Module T8442
Issue 8 Apr 10 PD-T8442 48
3.2.10. Rack 9 FB_INT (Feedback Integers)
Ch. Bit Channel Description Detail
1 - Group 1, Over-speed threshold
2 - Group 2, Over-speed threshold
3 - Group 3, Over-speed threshold
Over-speed threshold:
This reports the over-speed threshold
values in use for each input group.
The threshold value is reported in
RPM.
4 - Group 1, Over-acceleration threshold
5 - Group 2, Over-acceleration threshold
6 - Group 3, Over-acceleration threshold
Over-acceleration threshold:
This reports the over-acceleration
threshold values in use for each input
group.
The threshold value is reported in
RPM/second.
7 - Group 1, Over-speed test threshold
8 - Group 2, Over-speed test threshold
9 - Group 3, Over-speed test threshold
Over-speed test threshold:
This reports the over-speed test
threshold values in use for each input
group.
The threshold value is reported in
RPM.
10 - Group 1, Over-speed hysteresis
11 - Group 2, Over-speed hysteresis
12 - Group 3, Over-speed hysteresis
Over-speed hysteresis:
This reports the over-speed hysteresis
values in use for each input group.
The hysteresis value is reported in
RPM.
13 - Group 1, Channel 1, Number of Teeth
14 - Group 1, Channel 2, Number of Teeth
15 - Group 1, Channel 3, Number of Teeth
16 - Group 2, Channel 1, Number of Teeth
17 - Group 2, Channel 2, Number of Teeth
18 - Group 2, Channel 3, Number of Teeth
19 - Group 3, Channel 1, Number of Teeth
20 - Group 3, Channel 2, Number of Teeth
21 - Group 3, Channel 3, Number of Teeth
Configured number of teeth.
(See 3.1.1)
22 - Group 1, Over-Speed Limit
23 - Group 2, Over-Speed Limit
24 - Group 3, Over-Speed Limit
Configured over-speed limit.
(See 3.1.3)
25 - Group 1, Over-Speed Test Limit
26 - Group 2, Over-Speed Test Limit
27 - Group 3, Over-Speed Test Limit
Configured over-speed test limit.
(See 3.1.4)
28 - Group 1, Over-Acceleration Limit
29 - Group 2, Over-Acceleration Limit
30 - Group 3, Over-Acceleration Limit
Configured over-acceleration limit.
(See 3.1.5)
31 - Group 1, Over-Speed Deadband
32 - Group 2, Over-Speed Deadband
33 - Group 3, Over-Speed Deadband
Configured over-speed deadband.
See 3.1.6
34 - Over-Speed Test Timeout Configured over-speed test timeout
value.
(See 3.1.19)
35 - Relay Test Interval Configured relay test interval.