User guide

Trusted

Expander Chassis T8300

Issue 13 Jul 12 PD-T8300 14

2. Installation

The Trusted

Expander Chassis is installed into a swingframe-mounted, or fixed frame as shown in

Figure 9 using M5 x 12 Pan Head Taptites screws.

Figure 9 Installation of Chassis

Note that only the inner pair of holes in the mounting ears are used at this stage to secure the Chassis

in the swingframe. The outer holes are used to fit the plastic facia ears once all chassis and fan trays

are fitted and alignment is correct

Alternatively, the Chassis may be mounted on a panel, or equipment sheet using a Panel Mounting Kit

T8380 which comprises a pair of brackets with rear facing ears.

The brackets are first located and fitted using M5 fixings in four positions per bracket. The chassis is

then fitted to the front ears of the brackets using M5 x 12 Pan Head Taptites screws.