Manual

Trusted
TM
Communication Interface Adaptor T8153
Issue 12 Apr 10 PD-T8153 11
3. Installation
When connecting to the chassis connect the socket with the rear of the chassis and slide up until it
mates and clicks into place. The communications Interface need to be removed.
3.1. Communications Interface
3.1.1. Connector (SK1)
SK1 is a 78+2-way DIN41612, Inverse M-type connector.
CONNECTOR SK1 PINOUT
Pin
A B C
29 LINK
28 TXD0
27 RTS0 DTR0 RXD0
26 CTS0 DSR0 DCD0
25 RX/TXB0 RX/TXA0 RI0
24 TXB0 TXA0 GND0
23
22 TXD1 RTS1 RXD1
21 RX/TXB1 RX/TXA1 CTS1
20 TXB1 TXA1 GND1
19
18 RX/TXB2 RX/TXA2 GND2
17 TXB2 TXA2 GND2
16
15 RX/TXB3 RX/TXA3 GND3
14 TXB3 TXA3 GND3
13
12 P1_TD+ P1_TD-
11 P1_RD+ P1_RD-
10 CHASSIS GND
9
8 P2_TD+ P2_TD-
7 P2_RD+ P2_RD-
6 CHASSIS GND
5
4 LINK
Table 3 SK1 Connector pin-out