Instruction Manual

Trusted
TM
Communication Software Package T8017
Issue 10 Mar 08 PD-T8017 33
Dual Peer to Peer Analogue Output (data is sent via both subnets automatically).
d
xpao – DATA rack Value Comment
NETWORK_ID 1 Network 1
TARGET_PEER_ID 2 This output is going to PEER_IP_02.
SOURCE_DATA_ID 1 Will transmit data ID 1. This is a unique packet ID to
enable the system to distinguish between different data
packets routed between the same source and
destination.
REFRESH_TMO 2000 Maximum time peer data is sent if no change of
application values above the MIN_DELTA has
occurred.
MIN_DELTA 20 The value change that is required before the data will
be transmitted. If the value change is less than this, the
value will be transmitted based on the
REFRESH_TMO setting.
Variable 1 - 16 Analogue
Output
Analogue output points.
Table 10 Example 2 - PEER_IP_02 Analogue Output (data sent automatically)
Dual Peer to Peer Analogue Output (data is sent via both subnets automatically).
dxpao – DATA rack Value Comment
NETWORK_ID 1 Network 1
TARGET_PEER_ID 3 This output is going to PEER_IP_03.
DATA_ID 2 Will transmit data ID 1. This is a unique packet ID to
enable the system to distinguish between different data
packets routed between the same source and
destination.
REFRESH_TMO 2000 Maximum time peer data is sent if no change of
application values above the MIN_DELTA has
occurred.
MIN_DELTA 20 The value change that is required before the data will
be transmitted. If the value change is less than this, the
value will be transmitted based on the REFRESH_TMO
setting.
Variable 1 - 16 Analogue
Output
Analogue output points.
Table 11 Example 2 - PEER_IP_03 Analogue Output (data sent automatically)