Manual

Math Package for W INTERPRET (T 7 833)
2 Industrial Control Services
1. Insert the WINTERPRET base package distribution disk into
drive A: or B:
2. Start Windows (if it isn’t already running).
3. Choose Run from the Program Manager’s File menu.
4. Type a: \ setup.exe in the text box. (if you inserted the
W INTERPRET base package disk in drive B: type
b: \ se tup.exe .) Choose OK or press ENTER.
5. In the WINTERPRET Setup dialog box enter the name of the
directory in which you have installed the WINTERPRET
base package (This assumes that you have already
installed WINTERPRET). Choose Continue.
6. In the WINTERPRET Installation dialog box check the Math
package box.
7. Choose OK to have the setup program install the Math
package software.
When the installation is completed, you can run the
W INTERPRET application and create floating point math
function blocks in you application programs.
Working with Floating Point Math Function
Blocks
Floating point math function blocks are created as part of an
application program which may also contain other types of
function blocks. A single application program is made up of as
many as 50 function blocks of any type or combination.
When you installed the Math package, additional software
was added to W INTERPRET to allow you to work with floating
point math function blocks. With this additional software you
can create floating point math function blocks by opening a
project, opening a program and opening (or creating) a
function block.
For an overview about Regent application programs and
function blocks and how to create them using WINTERPRET ,
refer to Section 5, Working with Programs and Function
Blocks in the Regent User’s Guide.